Support The Forum: Buy ALDL Cables!

[RobertISaar]

i guess i should start ordering parts then... :D

[sherlock9c1]

I'm interested in one as well for my '94-95 LT1s. But let me ask - I have an existing ALDL cable that's 6' long - could you make an option where you send me the box all built up with everything BUT the ALDL cable portion and then I'll just wire my ALDL cable into the box myself?

[RobertISaar]

i wouldn't mind it at all... if you can solder onto a .1" pitch header(or through-hole if the header is removed) then you shouldn't have issues attaching any cable to the converter board. i would need a estimate on the diameter of the insulation for the cable so that the box can have the proper sized hole in it to pass the cable through.

if you can't, or don't want to risk it, then you could mail me the existing end and i'll attach it. expect around ~$2.30 to ship it USPS first-class in a padded envolope.

either way, that's less parts for me to buy, so i can cut you a break on the price as well.

[sherlock9c1]

Quick question, but would this thing support PCM reflashes? I didn't seem to find a clear answer in the other thread.

[RobertISaar]

done it MANY times on the MC in my sig... the 93-95 3100 PCM is a slightly stripped down version of the 94-95 LT1 PCM (seeing how it came out in 93, perhaps it would be better to state that the 94-95 LT1 PCM is a more equipped version of the 93-95 3100?) with no issues whatsoever.

[sherlock9c1]

Robert, just wanted to give you a heads up that I ended up purchasing a few of these boards from the Ebay seller. I'm going to hardwire the board into the car so I can just hook a USB cable right to the dash.

[FSJ Guy]

Wow. Somehow I missed this thread. I'll buy one for my at the moment non-existent TBI equipped vehicle.

PM will be sent.

[89-S-dime]

I need a OBD1 Scanner Cable - USB to 12 pin ALDL direct, I was wondering if you offer one, I would rather support the forum instead of buy one off of ebay

[RobertISaar]

i'm still being held up by suppliers, i need to chat with Jim and see how the alternative is going.

[89-S-dime]

ok thanks

[Mickey]

Try these folks out for OBD1 & 2 supplies.
I just received a 12 pin male molded end with ~ 3 feet of able and it appears to be a quality piece @ $15+ship not bad.

[Mickey]

OOOPS! for got
OBD DIagnostics, Inc

[Limitless]

Do you still sell cables here? I made one from some parts I had laying around but having issues. Time to get a good one. Thanks