New and im lost

[stport68]

im in the car now watching the data and saved a start idle file. i have a miss and im trying to see it on the screen but i can not get the reading for seperat cylinders. and do i need to write my own program tune or is there other tunes i can load in to the pcm

[EagleMark]

There is no mis fire data in OBDI...

[stport68]

okay was not sure. still need to work at it some more im still trying to read my car and figure out hoe to add some tunes to it for the mods that are done to it. i saved a idle run at warm so i have made some process but there are alot of things to do with this program it is overwelming

[EagleMark]

And as soon as you know it all? You realize there's so much more!

[stport68]

thanks for that one. im just trying to get everything to work correctly it looks like i have to spend about $200 for a program to put into my car so that is my next step i guess seeing as i need to change the tune i cant find any and i have to pay someone to put it in. it is a neverending cycle i guess

[stport68]

for the life of me i can not get tunercat to work so im stuck with tuner pro standard

[EagleMark]

What $200 program?

TunerCat works fine. The Winflash program is what reads and write the file to the PCM. WinFlash is only $20.

To data log you need TunerPro RT! Regular TunerPro only does the bin file editing.