You're fine. I was worthless when I got into this - not that I'm all that and a bowl of grits now, but I've come a long way. It takes time and effort, just like everything else in life.
You're fine. I was worthless when I got into this - not that I'm all that and a bowl of grits now, but I've come a long way. It takes time and effort, just like everything else in life.
From JTEC.info: http://jtec.info/index.php?title=Fil...C_Overview.JPG
The engineering sample ECU has a daughterboard clipped on top of the MCU, with ribbon cables going from it to the three rows of pads on either side if the MCU. Pair of Hitachi HM628128LFP-7's, couple SMT components and a transistor. I'll post pics when the internet is back up at the house.
ping
so what is the purpose of the daughterboard then?Originally Posted by mekkis
'86 Grand National
bump
Last edited by mekkis; 05-22-2013 at 04:09 AM.
might want to try that again... red text is quite garbled.
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
Good catch, thank you. Red text still sucks, but is readable. I forgot how poorly mspaint rendered jpgs.
Posting Permissions
Reply With Quote
Bookmarks