So I was a little hesitant to go from the 1228062 ecm with a modded bin to a 1227747 ecm with a modded bin.
The reprogramming of the prom was a non issue.
In the 1227747 ecm, I am running the AKMJ bin modified with the BPW set to 142 based on the calculator Mark had posted in one of my other threads. Also, I set one of the parameter, I believe the TPS/EGR on, to keep the EGR off and turned the EGR flag to off. That is all for the bin edits at this time.
So, not knowing for sure that the ECM was any good to begin with, and being early enough in the day, I decided to try it out. Well, she started right up and seems to idle a little high, but in drive drops down to about 750, or whatever the following file shows. The advance in rpm was in park. There is a short period toward the end that I recorded while in drive and the brake applied.
Looking at the definition file, WOW, loving EVERYTHING it shows. I am pleased so far with the progress I have made, but still have A LOT to learn, so bear with me if you don't mind.
Here is the file recorded using the v5.1.xdf and v5.0.adx
Bookmarks