having trouble connecting to pcm

**englundjd** · 08-05-2013

sorry I havent had time to update or really check anything against another car.

EagleMark: I noticed in your V3.8 ADX that you have the "connection (and monitor) command" set to "ABS Connection" does that have something to do with the cars abs break system? My abs doesnt work and the fuse under the hood is pulled out. would this have something to do with it?

**EagleMark** · 08-05-2013

That may be why you can't get engine? Sounds like it is set for ABS. Change them to Engine Connection and Engine Data... sorry I usually leave them like this. As you can see you can do transmission as well.

EDIT: Changes ADX file in $EE info thread to default Engine!

**englundjd** · 08-06-2013

i will try this out and let you know back

edit: i am still having trouble, I am kind of led to believe that the issue maybe in the cord because i had data (but very sportatic and with a ton of errors as usual) the i unplugged the cord from the aldl port and tried again and got all errors

edit 2: video of my issue

The engine is running and I was getting some data as you can see by the *F guage moving from 0 a couple seconds in but mostly errors.

**englundjd** · 08-13-2013

alright so the service number on the 89' iroc is 1227185, does that sound correct?

edit: using the 32.xdf and matching definition file from tunerpro's website we have data on the iroc, although the ses light is flashing with the cord plugged in.

**englundjd** · 08-29-2013

went to o'reilly's and they were able to pull codes from my car so it has to be the cord or laptop.

I am at the point were its gotta be the cord making a bad connection somewhere or my laptop is just to slow to run tuner pro on win7