Tonight turned out to be a night of polishing a bunch of stuff to make the app more user friendly. Currently, when tapping "Connect to ECU", if for some reason the app cannot make sense of the data, beside Connected at the top of the dashboard, "Incorrect response length" will appear. Otherwise, it's also possible to see "Checksum mismatch" because I validate the checksum and make sure the dashboard is displaying only good data (same for data log). For some reason, it seems like I cannot get data from the ECM right away all the time, sometime I get it almost right away, some time you will see "Incorrect response length" and/or "Checksum mismatch" for a few seconds until the app is able to make sense of the data. Not sure if that is something I can fix or not but TunerPro seems to be having a somewhat similar issue so it could easily well be on the ECM side.
Btw, Is 8.9 reads per second any good ?
Bookmarks