Here's a bin file for TunerPro RT to use with the XDF files.
Here's a bin file for TunerPro RT to use with the XDF files.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Now all we need is the ability for tunerpro to flash these pcm's and the 411 will instantly become affordable for the comon man.
I still cant believe a roughly 11 year old pcm is still stupid expensive to tune.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
My RoadRunner works fine! Little expensive but it is all you need and is live emulator.
http://www.moates.net/roadrunner-ls1...ation-pcm.html
And there are flash programs soon to be released.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
TunerPro can flash the RoadRunner, and it's also an Emulator for $599. I can't see anything getting cheaper then that? To Emulate an LS engine? . Plug it in and 600 paremeters to start with. Roadrunner has been running Camaros at the drag strip for years.
Or add $525. for RoadRunner/TunerCat OBDII, then you would have a cable to flash. Simple software, need spreadsheets and a scanner, Still no data but TunerPro could do it or ScanXL is pretty sweet.
Or add $899. for EFI Live for complete system and still need $250 for a RoadRunner license. With this you get AutoTune, MAF Auto Tune and anything else you can dream up . Very indepth and complex.
Even when OBDII cables are ready and cheap the software is hard! Then differant software for each PCM. It's a daunting task. And if you get it wrong your PCM becomes a brick? Not as simple as buying a burner for the chip. It's about $300 to start chips without emulation, so $599. and $39 for TunerPro to run, tune and emulate an LS engine is pretty good. Can always have a permanant PCM flashed when done and do another.
Face it! We are surrounded by LS engines and 0411 PCM and will be for a long time!
We need to come up with some donations for dimented24x7 and he will keep improving and maybe release an ADX although I swear there is already one? This guys expertise has been a big help for what we do with OBDI stuff too, he's been around a long time! Could also be the source of affordable cable and reflash software!
So donate!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I just opened up the XDF in tunerpro and wow... holy crap! that had to be a ridiculous amount of work! I hope he enjoys the beer money!
Where is this BIN file again????
Bookmarks