Quote Originally Posted by RobertISaar View Post
exactly like that for MOST 8192 baud applications will be correct. some will need a switched 10K resistor going from A to B pin, and 160 baud will require connecting the Tx/Rx/ALDL M circuit to the ALDL E circuit, at that point, you're ready to take on everything that uses the 12 pin connector.
Thanks for the quick reply....... so I am running 1994 impala ss which is a 8192 baud application...correct? I don't need to worry about the 160 config...right? Regarding the 10K resistor going from A to B pin, that is for TPI w /MAF..... does that apply to me?