Very cool!
Very cool!
and you can build those hybrid distributors with those 2 pieces of equiptment! Actually just ths lathe, but with the millport you can make injector holes in an intake for MPFI !
I've been thinking of getting a sheetmetal brake to make ECM brackets, like in attached PDF...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
At least you spent the money on things that are useful, and could be used to make money. Excellent purchases!
Well the mill is finally paid off along with 2/3 of the lathe, I got them wired up, and making chips, well the mill is. I had to buy a vise for the mill, and I still need to get a hold down set for it, and a toolpost and tools for the lathe, and collets, and .........soon though.
1978 Camaro Type LT, 383, Dual TBI, '7427, 4L80E
1981 Camaro Z-28 Clone, T-Tops, 350/TH350
1981 Camaro Berlinetta, V-6, 3spd
1974 Chevy/GMC Truck, '90 TBI 350, '7427, TH350, NP203, 6" lift, 35s
If you follow some links from URL below there are some pretty cool setups for tool stands on mill and lathe. Along with a lot of other cool stuff!
http://www.homemadetools.net/
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Bookmarks