WTB: GMPP TBI / Vortec Intake Manifold

[dave w]

This intake only offers mild performance gains over stock. A factory 86-87 aluminum 4bbl quadrajet manifold with adapter can provide greater gains while retaining EGR and factory manifold heating and it bolts right onto the factory heads.
http://www.ebay.com/itm/Chevrolet-OE...cfe58e&vxp=mtr
(Not my part)

I agree, the factory cast Q-Jet aluminum intake is often over looked as an affordable intake option for SBC cast iron heads 1986 and before. Unfortunately, the TBI heads from 1987 ~ 1995 had the center bolt holes angled differently, so the factory cast Q-Jet aluminum intake is not a simple swap to TBI heads without elongating the center mounting holes.

I think Devin is looking for an intake that will bolt to the 1996 / newer Vortec heads that have eight intake mounting bolts.

dave w