Originally Posted by Accrdwgnguy
feed and return in, feed to fuel rail out. Uses GM quick disconnect fittings, you can get these fittings off junkyard GM cars or use the AN adapters.
The higher pressure to going to up your fuel injectors flow rate, fuel injector rates are typically advertised at 43.5 psi.
Understood-
I will need to base my injector sizing based on the PSI I intend to run.
Right now I'm deciding if I want to use this filter / regulator arrangement or run with a Camaro style pump with the regulator built in.
Thanks!
Elm
Reply With Quote
Bookmarks