Just need 2. I had the complete pigtail and did not want to strip it down. So I just plugged in all of them...
Just need 2. I had the complete pigtail and did not want to strip it down. So I just plugged in all of them...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Thanks...I need to purchase the ALDL interface for the bench harness and PC - will either of these work for my 95 LT1 flash:
Moates
http://www.moates.net/aldu1-and-cabl....html?cPath=64
Red Devil River
http://www.reddevilriver.com/aldl.html
Last edited by EDZIP; 01-26-2014 at 02:38 AM.
Yup! So will Roberts!
http://www.gearhead-efi.com/Fuel-Inj...uy-ALDL-Cables!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Some of the 95 LT1 had a OBDII 16 pin port. OddBall! Still OBDI and if you have one and don't want it, you can wire in a OBDI port.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Then you'll have an oddball OBDI cable that is barely ever used... or change out your OBD port to a 12 pin for about $2-12 dedending on JY or new.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Bookmarks