Is there a way to average 2 values in an .ADX into a single new value in the .ADX so that we may use it in a Histogram? For example:
Average Left and Right BLMs to get a single Average BLM Value that may be the Object of a Histogram.
Is there a way to average 2 values in an .ADX into a single new value in the .ADX so that we may use it in a Histogram? For example:
Average Left and Right BLMs to get a single Average BLM Value that may be the Object of a Histogram.
I believe there is, look at how people are setting up mpg gauges in their ADXs, should help shed some light on linking data values.
The man who says something is impossible, is usually interrupted by the man doing it.
Still haven't figured out the math conversion for it though...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
if you linked left blm and assigned it letter L and right BLM assigned to letter R wouldn't the conversion equation simply be "(L+R)/2"?
Last edited by PJG1173; 02-17-2014 at 08:08 AM.
87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,
To simple! Must be a more complicated way?
Been telling you this Chemo affects thinking, sometimes I look at something and it's just a blank... glad it's over!
If anyone has a $EE data log .xdl file post it up! I'd like to try this and some other ideas I had for that ADX file.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Check this out and see if it looks ok.
Look OK? How's it work? You converted to percent as well and combining the BLM for an Average.
Is this correct way to bet percent from BLM? ((X-128)/128)*100
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Yeah that is exactly what I am doing there. It may not be 100% accurate but sure does make for a quick way of getting things roughed in. I usually shoot for -4% when tuning.
Bookmarks