Moates Autoprom TunerPro RT Failing to Emulate

[UglyBoost91]

It was running on the Limp Home Chip.

Always load the bin to emulator and then verify! Sometimes it fails, load again until it verifys! Turn key on and watch CEL, it should come on, blink, then stay on till engine starts and go off. If it comes on after that you have set an error code.

Gotcha, thanks. When trying to emulate, I was getting it to verify. I then initialized and it said that it was emulating. But then again, I still can't connect once keyed up. No CEL with key on and emulating. I'm thinking this has to be a wrong definition or the ribbon cable not hooked up correctly.

[EagleMark]

Initiate is TunerPro hooking up to the Emulator. After that you need to click on Emulate. Both switches in...