Results 1 to 10 of 10

Thread: Looking for a good tuning guide/book

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,358
    I've attached a few screen shots to start the discussion of tuning.
    A few key words:
    LV8
    MAF
    Frequency

    I don't have experience with a Supercharge Buick V6. In my thinking, the .adx file needs to be updated. The MAF frequency vs. grams per second will need adjustments when making performance changes to either the engine or a .bin file. In my thinking the injectors are controlled by the grams per second of air flow measured by the MAF sensor. In my thinking, when the supercharger goes into boost more air is flowing through the MAF, which outputs a higher frequency to the PCM. The PCM will increase the injector pulse width with a higher MAF frequency.

    I don't have experience to know what happens to performance of a supercharged engine when adjustments are made to the MAF frequency vs. grams per second. I'm wondering where the BLM system is in the Buick supercharger PCM? In my thinking, making adjustments to MAF frequency vs. grams per second with BLM's would be ideal. I'm wondering what would be recorded in a data log if the Z axis was configure for BLM with X / Y axis set up for MAF / LV8.

    If I only had a Supercharged V6 car to experiment with.

    dave w
    Attached Images Attached Images

  2. #2
    Fuel Injected! th3fr4nchi5e's Avatar
    Join Date
    Mar 2013
    Location
    Cheektowaga, NY (Buffalo)
    Age
    30
    Posts
    20
    Thanks Dave! What am I looking for when adjusting the MAF tables? If that is controlling the injector pulse width as well, wouldnt it already be compensating for and airflow changes Ive done the the car? And I know LV8 is a measure of load but Im not sure what is considered a high value or low value? I assume you will want a richer AFR with high LV8 values and a leaner or more normal AFR for lower values? So if there is no table that uses BLM in my PCM, would you recommend I tune the MAF frequency table by monitoring BLM after changes are made?

    Dave N
    1995 Buick Riviera S/C

  3. #3
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,358
    Hi Dave,
    With you help, I was hoping to get a data log with the .adx set up to record BLM vs. LV8. I think there is something similar in the older MAF style TPI .adx for recording BLM vs. LV8? I don't know enough about the supercharged V6 to feel confident about making adjustments.

    dave w

  4. #4
    Fuel Injected! th3fr4nchi5e's Avatar
    Join Date
    Mar 2013
    Location
    Cheektowaga, NY (Buffalo)
    Age
    30
    Posts
    20
    Oh, gotcha! I will try to set it up to read that way or find something similar from what can be read. Will play with it soon and record what I come up with!
    1995 Buick Riviera S/C

Similar Threads

  1. Book Review:How to Use and Upgrade to GM Gen III LS-Series Powertrain Control Systems
    By EagleMark in forum EFI Parts, Supplies, Software and Reviews!
    Replies: 6
    Last Post: 09-30-2013, 10:14 AM
  2. Newb ?? hex code location guide??
    By Blazer3664 in forum GM EFI Systems
    Replies: 4
    Last Post: 12-24-2012, 12:53 AM
  3. Micro-mini startup Guide for Beginners
    By historystamp in forum TunerPro Tuning Talk
    Replies: 36
    Last Post: 12-19-2012, 12:18 AM
  4. Good deal turns out not so good.
    By JeepsAndGuns in forum Gear Heads
    Replies: 6
    Last Post: 12-06-2011, 03:04 AM
  5. Good Day
    By Lucky in forum Introductions
    Replies: 4
    Last Post: 03-05-2011, 10:05 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •