Results 1 to 15 of 19

Thread: Help with vss connector

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected! blue68deville's Avatar
    Join Date
    Feb 2014
    Location
    Denver
    Age
    51
    Posts
    111
    What is this tbi going in and what eng and trans are you using? If it is going in something using a cable driven speedometer, just use an inline vss and you won't need the vss module at all.
    http://www.jagsthatrun.com/Pages/Spe...eedometer.html
    68 Cadillac, 472 & TH400 w/7.4L TBI and EBL **sold**

    93 K1500 short step, 5.7 & NV4500 and EBL

    68 C10 LQ4/TKO swapped

  2. #2
    Fuel Injected!
    Join Date
    Feb 2014
    Location
    Upstate, NY
    Posts
    416
    Its going in a 78 k20. 5.7 th400. I want to keep the vss in the speedo because it's simple and i allready have it.

  3. #3
    Fuel Injected! kunsan1987's Avatar
    Join Date
    Feb 2012
    Age
    59
    Posts
    45
    GM made 2 of these units. 1 was for cruise control (yellow 3 wire) the other was blue/green for tbi vehicles with cruise control (4 wire). both are 2k pulse.

    http://www.oreillyauto.com/site/c/de...1879&ppt=C0033

    http://www.oreillyauto.com/site/c/de...1879&ppt=C0033

  4. #4
    Fuel Injected!
    Join Date
    Feb 2014
    Location
    Upstate, NY
    Posts
    416
    I am looking for the connector that plugs into the green box.

  5. #5
    Fuel Injected!
    Join Date
    Feb 2014
    Location
    Upstate, NY
    Posts
    416
    I am still looking for the connectors. i asked other places but people don't have it.

  6. #6
    Fuel Injected!
    Join Date
    Feb 2014
    Location
    Upstate, NY
    Posts
    416
    still looking

Similar Threads

  1. 1995 LT1 connector question (black 32 pin)
    By EDZIP in forum GM EFI Systems
    Replies: 4
    Last Post: 01-19-2014, 06:52 AM
  2. Rent GM dash instrument panel connector, just pay deposit and shipping
    By bentrod in forum Buy - Sell - Trade - Wanted
    Replies: 5
    Last Post: 07-02-2013, 10:51 AM
  3. Connector for 5 pin side of ignition module???
    By Blazer3664 in forum GM EFI Systems
    Replies: 0
    Last Post: 05-29-2013, 04:47 AM
  4. 7427 pcm connector pins for 4L80e??
    By Blazer3664 in forum GM EFI Systems
    Replies: 10
    Last Post: 12-28-2012, 08:55 AM
  5. Connector definition for TPS and MAP
    By Mastiff in forum GM EFI Systems
    Replies: 2
    Last Post: 03-14-2012, 07:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •