For those of you who haven't got this to work, it is a possibility that the breakout board is junk right outta the box. I ordered 3of these from the eBay link on post 1. ONLY ONE of my THREE boards is good so far. Streams data as good as the moates cable. The other two boards connect, but data flow is very intermittent because of the data errors, over and over. The only thing i can figure is the other two boards are defective after comparing and testing all 3 boards side by side. I'm going to contact the eBay seller and see what they plan to do about the two faulty boards i received. It is interesting how the Chinese get away with making so much trash. The 66% failure rate on these boards i have currently witnessed is not impressive.