1986 Camaro

[ony]

I didn't know that it wouldn't work. iam not up on the165 ecm on a 747 you would change crank afr ratio. if you have a slightly under charge battery or a starter dragging a little it will have to crank longer to start , hot or cold. iam not saying that is what is happening.

[ZEDRATED]

I didn't know that it wouldn't work. iam not up on the165 ecm on a 747 you would change crank afr ratio. if you have a slightly under charge battery or a starter dragging a little it will have to crank longer to start , hot or cold. iam not saying that is what is happening.

battery charge is good and I don't believe the $32B has a crank AFR table.

[ony]

I was looking at 32b there is 3 thing that could affect your starting but the definition file lists them as n/a . crank fuel mutiplyer vs paluse,crank fuel pulse width vs coolent temp,crank fuel pulse with vs tps. they are at the bottom of tables in tuner pro. your tuner might be able to change them or some one here on gear head. zedrated you can change them tables I forgot how to use tp.right clic the table click edit table you have too shorten your adx screen the tables appear behind it.

[ZEDRATED]

I was looking at 32b there is 3 thing that could affect your starting but the definition file lists them as n/a . crank fuel mutiplyer vs paluse,crank fuel pulse width vs coolent temp,crank fuel pulse with vs tps. they are at the bottom of tables in tuner pro. your tuner might be able to change them or some one here on gear head. zedrated you can change them tables I forgot how to use tp.right clic the table click edit table you have too shorten your adx screen the tables appear behind it.

I'll have a look when I get a chance but I'm not sure how to edit the ADX file and I'm pretty sure $32B doesn't have all three of those tables.

[ony]

you will be editing the program on your chip,you shorten the adx page by getting about the top of it left click hold and drag the page down the right clicked ,edit , table file will appear in the blank screen of your adx side of tp. it is the same as when you edited bpw only you are editing a different table.

[ZEDRATED]

you will be editing the program on your chip,you shorten the adx page by getting about the top of it left click hold and drag the page down the right clicked ,edit , table file will appear in the blank screen of your adx side of tp. it is the same as when you edited bpw only you are editing a different table.

im still not sure what you mean. If those tables don't exist in $32B what do you mean?

[ony]

they do exist you open them in the xdf file to edit them,the adx just says the parimaters are not available.dragging the adx page half way done lets you see the file after you have opened it with the xdf.