Ya, put an adapter plate onto the carb intake. You can probably use the TV cable bracket but if it doesn't fit then make it work by modifying it or buy a universal bracket that works.
The accessories should work. Your flexplate won't work if your old block was a 2-piece main rear seal block. Get a flexplate that matches the size of the starter you have. 153 tooth for a straight across bolt pattern or 168 tooth for an offset bolt pattern. Should be able to find one for $50 or less from a transmission shop or a place like Summit.
I really don't know on the exhaust manifolds. I was thinking the exhaust ports were raised more too but that may not be true.
Bookmarks