Originally Posted by
mtrhead
Thx, I'll keep that in mind.
BTW, WBO2 is installed, currently running 299 with stock chip, 14 psi w/ 65# injectors, rich in open loop, mixture not half bad in closed loop cruise. Leans a tad rich, 14.5 with crossovers at cruise. Narrow band sensor attached to ECM is in the left header, heater not hooked up yet, mixture as picked up by WB is rich at idle, appears NB falling asleep.
Logging must wait until a misfire, which seems to start out as sporadic at 2500RPM but becomes a dead jug at 3000 RPM and up is figured out. New coil, wires, cap rotor next. Real noticeable with a standard trans.
Bookmarks