Originally Posted by
steveo
the injector constant is pretty much your base fueling.
changing it will affect everything fueling related.
imagine all your fueling tables as building blocks on a platform, changing the injector constant is like raising or lowering that platform.
it's never correct to set to exactly 24 for 24lb injectors, since an injector that's exactly 24lbs doesn't exist.
if it's lean everywhere, lowering it will make everything richer, then you fine tune from there; it's perfectly ok to use the injector constant to effect a global fueling change, then fine tune from there.
if it's only lean in a particular area and rich in other areas, best not to touch it, and just fix the lean spot in VE or maf scaling, or whatever.
Bookmarks