Need help getting started vortec tbi

[93chevy]

Dave do you remember what injector setup was used on the bin? size/ pressure?

[Roadknee]

Did you set your initial timing to zero with the connector unplugged? I ask because your engine is idling around 60kpa manifold pressure which is high for your small cam. IAC is also pegged at 150 counts.

Look at the parameter RPM/VSS ratio to adjust for your gear ratio. There are instructions in the parameter comments.

[93chevy]

Did you set your initial timing to zero with the connector unplugged? I ask because your engine is idling around 60kpa manifold pressure which is high for your small cam. IAC is also pegged at 150 counts.

Look at the parameter RPM/VSS ratio to adjust for your gear ratio. There are instructions in the parameter comments.

This will be my next attempt.
Deadline at work has me drained.
This was the parameter I remembered seeing.
Thanks Roadknee

[dave w]

Dave do you remember what injector setup was used on the bin? size/ pressure?

I'm always challenged, am I a moderator or a business owner? As a moderator, I provided good information. As a business owner I've shared a .bin file that others paid $$$ for. Is it fair for me to say, run with the information I've provided and figure things out? Is it fair for me to say, send me a PM and lets figure out a business transaction?

In the game of chess, I say check ... your move.

dave w