I need help/advice. I have 93 chevy that somewhere down the line someone swapped 4.3 for 5.7. It had 700r4. It stopped shifting so I changed it for 4L60. Same prob. Stays in first and 2. The harness and computer were supposedly changed.???
I need help/advice. I have 93 chevy that somewhere down the line someone swapped 4.3 for 5.7. It had 700r4. It stopped shifting so I changed it for 4L60. Same prob. Stays in first and 2. The harness and computer were supposedly changed.???
Just to clarify, a '93 should have come from the factory with a 4L60E. So the 4.3/4L60E got swapped for a 5.7/700R4? Did you change the 700r4 for a 4L60 or a 4L60E? Did you have a shop swap the transmission, harness and computer? The original 4.3/4L60E harness should have worked to just swap to a 5.7, but downgrading to a 700R4 would have required a custom chip and wiring changes or swapping to the '92 and earlier computer and harness. Have you verified that both the VSS(tailshaft on drivers side) and main transmission connectors(passenger side of transmission) are actually connected to the transmission? Is this a car or truck?
1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
1975 280Z, TBI 350, 700R4
1953 M-38A1, TBI Buick 231
1951 Ford Panel, 5.3 with 4L80E
93 had the option for 700r4 or 4l60e.
89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
05 Outback XT 2.5L turbo gas auto
This is a truck. The harness has the round plug on passenger side. I had a 4L60E on hand so I just took the black switch off shifter since I didn't have the plugs for it. The truck didn't have the plug for the 700r4 just the cable kick down.
Have you tried to pull any codes? Also, double check to ensure that your memcal (chip) has the right tune (bcc) for a 5.7/4L60E combo.
1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
1975 280Z, TBI 350, 700R4
1953 M-38A1, TBI Buick 231
1951 Ford Panel, 5.3 with 4L80E
Bookmarks