Adapters are a good way to go, at least for testing and proofing. I've made several adapters over the years for various applications. '7747 to '7730/7749, '7148 to '7730/'7749, '7730/'7749 to '7165 and a couple others. I'll be making a couple more this summer to go between the current harness and a couple aftermarket ECMs.
I'm pretty sure there's another thread (or two) floating around with other people's adapter harnesses, but here is one I started, that shows the use of some DB computer connector pins that works far better than soldering the wire straight to the pin of the donor connector. http://www.gearhead-efi.com/Fuel-Inj...ne-or-started&
--==EDIT==-- Here's another thread: http://www.gearhead-efi.com/Fuel-Inj...apter-harness&
Bookmarks