BIN from the stock chip.
BIN from the stock chip.
Last edited by 1leg; 02-14-2012 at 08:14 AM.
1993 RCSB 1/2, 350/4l60 Eaton locker 3.42-1. Drag truck ET 10.84 1/8mile. Build Thread
1989 V2500 Suburban 350/th400, 4.11 gears, Tow truck, needs TBI 454 swap. Build Thread
wow, none of the ROM looks anything like the rest of the files I have.
EDIT: OHHHH. That's why, Mask ID $40? Looks like the whole .bin is just ????wrong????
Last edited by gregs78cam; 02-14-2012 at 07:30 AM.
1978 Camaro Type LT, 383, Dual TBI, '7427, 4L80E
1981 Camaro Z-28 Clone, T-Tops, 350/TH350
1981 Camaro Berlinetta, V-6, 3spd
1974 Chevy/GMC Truck, '90 TBI 350, '7427, TH350, NP203, 6" lift, 35s
1993 RCSB 1/2, 350/4l60 Eaton locker 3.42-1. Drag truck ET 10.84 1/8mile. Build Thread
1989 V2500 Suburban 350/th400, 4.11 gears, Tow truck, needs TBI 454 swap. Build Thread
I can't even find a $40?
So is that the file he got from this website is wrong? If so I will delete it... or is it wrong after he made changes? I really don't want bad bins floating around.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Deleted... But that was a copy of the stock chip pulled from the G20 ECU. and it said ASDZ. And it ran fine other then the TCC. Wierd. Could i have screwed up coping it. I burned 4 chips with different BINs. Hopefully I can get this thing to stay running tomorrow, if its not raining.
1993 RCSB 1/2, 350/4l60 Eaton locker 3.42-1. Drag truck ET 10.84 1/8mile. Build Thread
1989 V2500 Suburban 350/th400, 4.11 gears, Tow truck, needs TBI 454 swap. Build Thread
Man if my truck didn't run in the rain I would have to fix it?
Must have read it wrong? Something was wrong! It was not even close to anything being correct... you should really only need one bin, mine!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Mark
Your 1leg bin youposted above is for th350 trans? So should work with my th400 I'm not worried about kickdown now. I just need this thing to run.
1993 RCSB 1/2, 350/4l60 Eaton locker 3.42-1. Drag truck ET 10.84 1/8mile. Build Thread
1989 V2500 Suburban 350/th400, 4.11 gears, Tow truck, needs TBI 454 swap. Build Thread
No it's 700R4 that I made changes to disable TCC and ran in a turbo 350. So it will be fine with yours except the Turbo 400 Kckdown I have never tested.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Ok got the Suburban running today on the first chip i tried.
Ran ok
Idle needs work
Power seemed a little down(hard to tell really)
no TCC lock-up
No kickdown
Temp still reading high
1990-V3-1leg bin
$42-1227747-1leg.xdf
Below are a couple of logs, 1st log has a few miles of me driving around the block. the second log is just idling in the driveway after i drove it around. It seemed to have a little bit of a rattle when idling so i did a log. when i say rattle i don't mean engine knocking just not running smooth. weird didn't do that before.
I have a few question but i will let you guys look at the logs first. when you get the time.
Thanks guys for all the help!!! I still have a lot to learn but i'm still having fun.
1993 RCSB 1/2, 350/4l60 Eaton locker 3.42-1. Drag truck ET 10.84 1/8mile. Build Thread
1989 V2500 Suburban 350/th400, 4.11 gears, Tow truck, needs TBI 454 swap. Build Thread
Bookmarks