Ok as of now this is what I have found out.
Motor will run while spraying starting fluid.
during this running the injectors are pulsing
Installed a electronic fuel pressure gauge
During start up it is running 13.5 pounds
after the key is let go it is running right at 13 pounds
once engine dies it takes fuel pressure to die off about 20 secs
map sensor is registering correctly
tps and iac are new
ect is new 2.89 kilo ohms which is 2890 ohms its about 75 degrees outside
Distributor is new
Fuel pump is new
What have I missed
spark plugs wires and coils NEW
Bookmarks