Knock sensor fault

[Oysteinbno]

I have a little log when I just started the car and let it idle for a little while.
I think it is best to tune out the knock sensor. Set the tables for 0 degrees retard and a high knock enable setpoint for the temperature.
See the logfile attached. The file is generated from EEHack, so the file needs to have the name changed from .doc to .eedata

[dispoejoe95]

OysteinB...have you had any luck solving your knock issues?

[Oysteinbno]

Hi Dispoejoe95. No, not really. I have tried to tune out the knock adjusting. But then I hear the engine knock..( of course.. :) ) So I have tried to adjust the spark table by retracting the spark 3 degrees overall. I can't hear any knock now, but I haven't run a log yet to see if the knocks is still there.
I'll post the results as soon I have checked this.

[BigBanks78]

If you set retard to 0.00 will the knock counter still show knock on history table?

[Oysteinbno]

If you set retard to 0.00 will the knock counter still show knock on history table?

Yes I believe so. The knock counter would still increment, and it will retard 0 degrees