Ok if I buy the ostrich 2.0 what else will I need to hook it up to 7727 ecm, will I need any other adapters and I will be using ALDLDroid installed on a tablet that has 1 usb port. any other info will be appreciated.
Ok if I buy the ostrich 2.0 what else will I need to hook it up to 7727 ecm, will I need any other adapters and I will be using ALDLDroid installed on a tablet that has 1 usb port. any other info will be appreciated.
You will also need a cable to datalog with, such as the ALDU1 (with the appropriate cable for your application).
The man who says something is impossible, is usually interrupted by the man doing it.
Yes, in order to both emulate and datalog you will need both plugged in.
You have two options:
1) Use a USB hub to connect both devices to your tablet. However it seems that sometimes people will end up with the devices enumerating every time they are connected and need to re-assign ports in TP RT everytime.
2) Get an AutoProm, this is a one USB cable solution that emulation, datalogging, and EEPROM programming all in one. There are also addition analog channels that can be monitored with an AutoProm that you wouldn't otherwise be able to monitor.
The man who says something is impossible, is usually interrupted by the man doing it.
Why is the USB hub not an option?
The man who says something is impossible, is usually interrupted by the man doing it.
Picked up a USB hub adapter at walmart and I am able to data log and run the ostrich at same time.
unforginitly I am having a problem with the cable connecting to the G1 adapter, I wil try and slightly bend the
pins so it sits in tighter.
Bookmarks