What equipment are you using?
Emulator or programming an EEPROM for each change?
What equipment are you using?
Emulator or programming an EEPROM for each change?
The man who says something is impossible, is usually interrupted by the man doing it.
Ok so got some help from a guy on the 3rd gen forum. Turns out factory aujp has a max idle limit of 800 rpm from the factory. Guy told me where to find it in hex, changed it to allow a max of 1500 rpm so its out of my way now. Then added a parameter to my definition file so i dont have to dig through hex and do the math again if i need to change it. Car is loving idle at 1100, might try bringing it down slowly depending on how she actually drives..
Using a moates burn2 with hdr1 memcal adaptor and eeprom
Posting Permissions
Reply With Quote
Bookmarks