Hi, I'm using AVT-852 cable with Dimented's LS1 flash tool. So far it was working OK, but I got into trouble with one PCM.
It is 411 pcm from a truck with 9381344 operating system originally. I read the stock bin with no problems.
Then I updated the PCM using Tech 2 SPS to the newest bin for the same VIN. It changed OS to 12205612. No problem reading/writing with LS1flash tool after that.
Then I wanted to get a virgin calibration for another car I'm tuning, I programmed the PCM with a VIN for 2002 Camaro SS with 12212156 OS. Everything went OK and the PCM is working in the car, but after that SPS flash I can't start programming session using Dimented's tool.
After I click "start programming session" the log says "Skipping security access" and then gives a timeout error. When this was working correctly, it would never log "Skipping security access", only get seed and send key.
Has enyone encountered simmilar issue?
I tried to reprogram it again with SPS, but it didn't help. I even went back to the original VIN with truck OS, but still the same result.
I think that must be something with SPS changing the security access when programming...
Thanks for any help!
Bookmarks