I apologize but I havent done this for a while, but I was doing it quite frequently when I was data logging for my tuner. This is the cable I have http://aldlcable.com/ Everything is set up to the best of my knowledge just as it was then. When I open tuner pro it says not connected. I feel like all I had to do in the past was click in the double arrow icon to connect. When I do that now it changes to connecting but doesn't go anywhere from there.
95 GMC K2500, 4l80e, 4.10 gears, 355 L05 4-bolt block, ARP rod bolts, Speed-Pro H423DCP-30 pistons, moly rings, 217 heads, vortec cam, TBI mods, cop car injectors, headers, 2 1/2" Y-pipe and 3" single exhaust with high flow muffler and cat.
Also says hardware not found on the bottom of the screen
95 GMC K2500, 4l80e, 4.10 gears, 355 L05 4-bolt block, ARP rod bolts, Speed-Pro H423DCP-30 pistons, moly rings, 217 heads, vortec cam, TBI mods, cop car injectors, headers, 2 1/2" Y-pipe and 3" single exhaust with high flow muffler and cat.
Posting Permissions
Reply With Quote
Bookmarks