Few questions:
- Does anyone know how do i wire speedo from 0411 pcm wire that gives 4K output: via VSS Lo or VSS Hi wire, or both toghether?
Because the old type of speedo used to get the signal directly from the VSS sensor and transform it to 4k and then out of speedo to PCM/ECM as 4k pulses. But with the swap, the signal goes direct from sensor to PCM, PCM transforms it to 4k and out of the PCM. So where to wire it in the speedo, to wich wire/s???
- Another question is my VSS sensor is located on my transfer case NP241C, will it function correct with 0411, or will i have to change it if someone knows?
Thanks.
Bookmarks