Originally Posted by
Quaraxkad
IT RUNS!!
12588500v1.0a.bin was the ticket, thank you so much!! I don't know if it's the updated program version or that my software doesn't disable VATS correctly, but it's running! As an experiment, I took the stock bin, loaded it in TunerCATS and made the same changes you listed here. Then compared it bit-by-bit in a hex editor with your 1.0a bin, and there are three different bits. At position #710CB in my version is #99, in yours it's #9A; and at #7D1C6 my version is #01#FF and yours is #02#00. If I feel like experimenting further, I'll try flashing my version and see if the car stills runs. If it *does* then I'll know that the issue was with the version of the bin I was using as a starting point; if it *doesn't* then obviously my software can't handle VATS on this PCM.
In any case, thank you!
Bookmarks