Hello my names Cade and I have a 95 Chevy Impala. I'm on the ImpalaSS Forum under the same name. My recent discovery was how nice $EEHack is and how convenient it will be to make upgrades and tune accordingly down the road by a real tuner. I am 10 bucks into this but wanna get it right I only have 1 PCM on me so don't wanna start and mess up I would like to get competent at how this whole thing works and communicates. I'll be taking my ride on a trip to Flagstaff, AZ from California and my brother has done tuning so this experience will benefit me greatly. So my next step is actually connecting the red board I bought and the cables from Rx Tx and Ground to my OBD port. I know which port they all go to now but I dont think the thin male cable will fit in the OBD especially with Rx and Tx in the M port and then just ground. Next thing I have to learn is Bin's and definition's and all other terminology. Thank you for your insight I'm very grateful
Bookmarks