EEHack 2019 update

[Terminal_Crazy]

Hi Steveo, Just having a play.

I like the single main page. I didn't like having to move the panel to the side everytime I ran it.

I'm running it on my desktop atm as my in car laptop screen has cracked. Will that still fit in a 1024x800 screen ? (obviously i need a better laptop)
I guess it still auto connects with the ignition switched on ? That was awesome when I took it for a dyno run. I just gave it to the lads & it recorded every run.

I loaded a log and had a play.
In the graph window logged some data. opened a second one and tried to view more data. Nothing plotted in the second+ screen.
checked in the first and it displays. I've lost the 1st graph and none of the others plot any data
... Settings definition file was set to a previous version (Kur4o's) so reset that & re run EEHack. No data is being displayed

In the Analyzer window, hovering over the knock count does display the timestamp but needs reducing by1000. #5741@ 788.9 displays as 788949

I've just ordered some Speed Engineering 1 3/4 Longtubes.
Can EEHack be configured to display Dual Wideband inputs in AFR & Lambda equivalent ?
Are the input curves of the AC Pressure & D27 similar enough for this?

Playback: Fast button doesn't seem to run any faster on or off.

Excellent stuff Steveo.
Thankyou

Mitch

[steveo]

thanks i'll check that stuff out. i just noticed cpu use when in 'fast' is pretty high, im pegging your CPU, so i'll have to do some profiling. it should fit in 1024x800 ...

[steveo]

i've fixed the graphing and the knock timestamp. the higher than normal cpu use is a bit odd i'll have to play with it

[steveo]

Another quick update, this one makes the graphing work properly again, makes the UI look a bit nicer (missed a library in the last release..) but I also re-implemented the dashboard’s caching engine so processor use should be reduced dramatically. Thanks to Mitch for the quick testing. Please let me know how it works for you!

http://fbodytech.com/files/eehack-beta4.8.1.zip

[Terminal_Crazy]

beta4.8.1

Errored initially as no definition file was found. Selected and starts up ok.

Multiple graph views display data.
1st graph window displayed the posaition indicator. Subsequent windows didn't.
However, when scrolling the main window playback position slider, the graph window position indicator bars appeared & move all together when scrolling the position.

Knock timestamp works.

Playback:
cpu usage 22% on slow. 26% approx when running fast.(same as beta4_8).
Position indicator now counts about twice as quick on fast as opposed to slow.

Excellent!

Mitch

[NomakeWan]

The 4.8.1 update did indeed fix the graphing error and made it display a little better on my netbook (1366x768). It still prefers if I have "auto-hide taskbar" enabled (otherwise the VIN/CALID sections get squished vertically), but it works well with auto-hide enabled.

Aside from the functional changes I noted in my EEHack Read Fail thread (all good things), I noticed the new version has a couple of minor bugs. Carried over from 4.7, the checkboxes for "unsaved log" and "unsaved notes" under the "warnings on exit" in settings still do not do anything (the program always warns on exit regardless of this setting). I can't tell if "Save Invalid BIN" works because the read process actually fails this time before completing, but I assume it's probably working now. In the graph display, "Transmission Selected Gear" does not appear to be working properly as the graph scale isn't whole numbers, goes off the top edge, and doesn't actually appear to indicate 1st or 2nd gear. Also, it still appears that the indicator for "Transmission Perform Switch Pressed" is reversed, indicating "ON" when not depressed and "OFF" when depressed. Those are all old bugs, though.

The new bugs I noticed, most were fixed with 4.8.1, though clicking "Now" for "new version notification" results in a network error regardless of network status on both 4.8.0 and 4.8.1.

[steveo]

i'll look into that stuff, thanks to both of you for trying again. the checksum bugs were really annoying to fix so i'm glad that worked.

is the selected gear really broken everywhere or just the graphing module?

can someone else confirm the 'transmission perform switch' is backwards? it'd be a simple definition file fix but need to make sure..

[NomakeWan]

Oh, it's only the graph. It works perfectly in the datalog screen. :)