So my additons for Target EQ won't work for PID119E or PID68. I get nonsensical data...which seems tied to vehicle speed for some reason. Same with the PID22 for the rear o2 sensor (that I added the wire in). Voltage is 0 at a stand still, and climbs with vehicle speed. Not sure what I'm doing wrong.

My next plan is to change my wideband from 0-1v to 0-5v and try the EGR position wire. But I'll have to flash a new tune to zero out EGR added spark and physically unplug the EGR and tap into the wire. I'm not hugely excited on that idea...but I need something to work.