so here's the struggle... look at the difference in aldl request timing!
the bbody bin spits out messages at a much higher rate.
between windows drivers and serial interfaces, this confirms the precise approach of sending a request between packets is impossible. i am going to come up with something way better. i want to try to abuse the length and checksum to basically 'hang' the bus and then unhang it at the same time that we send the request....
FBODY:
Code:
159ms to 175ms (16ms) :: F056F4C6
::: GAP34ms
209ms to 231ms (22ms) :: 905A02080008FF05
::: GAP31ms
262ms to 285ms (23ms) :: 0A58FF00009F
::: GAP27ms
312ms to 330ms (18ms) :: 905A02080008FF05
::: GAP31ms
BBODY:
Code:
::: GAP0ms
0ms to 17ms (17ms) :: 92551919
::: GAP9ms
26ms to 42ms (16ms) :: A6550505
::: GAP9ms
51ms to 68ms (17ms) :: F056F4C6
::: GAP9ms
77ms to 103ms (26ms) :: 405F020400870000007F00480D
::: GAP0ms
103ms to 132ms (29ms) :: 4563000000000000080000000000A0A010
::: GAP5ms
137ms to 154ms (17ms) :: 12559999
::: GAP21ms
175ms to 194ms (19ms) :: 10559B9B
::: GAP9ms
203ms to 218ms (15ms) :: 92551919
::: GAP9ms
Bookmarks