2002 TunerPro Bin Files

[1project2many]

Hi, im trying to download the bin file for 5.3 manual trans and it keeps coming through as a adobe document, I need it as a XDF file. any help?? thanks, Mark

Hi Mark,
Can you post a link to the file?

[jz2518]

Hi Mark,
Can you post a link to the file?

Let mark rest in peace. Use search or get on ls droid facebook group.

[1project2many]

Let mark rest in peace. Use search or get on ls droid facebook group.

I'm the site admin. bbg2020, also named Mark, said he's having trouble downloading a file. I'm asking for the link so I can attempt to help.

[95_C4]

I have a 411 PCM and I used PCM Hammer to update it to the 2156 OS. I am swapping a Gen 3 5.3 V8 with 4L80 into a Dodge. I would like to segment swap the 4L80 portion since that combo was never sold by GM. I see the only 2156 file with a 4L80 here is for a pre-LS (L31) Express van. Can I use that file for the segment swap?

Thanks.

UPDATE
I used LS Droid to segment swap the Van 4L80 file (see below), and PCM Hammer to write it to my 411 PCM- no errors. I did the transmission and transmission diagnostics. The base file was the 2002 Silverado 5.3 DBC no EGR from post #8, I modified it by changing the tach output from 6/6 to 3/3 and disabled some MIL codes for the rear O2 sensors. I'll update here if it works, I'm still a ways from starting my swapped engine. I'm attaching the new bin file.

UPDATE #2
When I checked the segment swapped file with HP Tuners, it showed as backwards- the engine was a 5.7 not 5.3, and the trans was a 4L60, not 4L80. As such, I don't think this file is usable as-is.

UPDATE #3
I found my error was in LS Droid. I presumed the green button meant you were swapping that function, and the red one meant you were not. That's backwards. I deleted the file until I can fix it.

UPDATE #4 11/7/20
Updated file attached. My truck developed a mechanical problem (oil leak), but the tune allowed it to run OK. As I recall, it has a number of MIL codes disabled such as EGR and secondary O2 sensors, AC and VATS are disabled, and the tach hi/low resolutions were modified. I was not able to drive the truck to verify the trans shifted properly, so use at your own risk. It did show up as a 5.3/4L80 in HP Tuners though.

[dhooks]

Any luck on swapping the 5.3/4l80 combo yet? I could use it if it's done

[95_C4]

Just updated the prior post with the revised file. Give it a try and let me know how it goes, I'm down for at least a couple of weeks.

[dave w]

Possibly someone will share a stock 2002 Camaro LS1 with Manual .bin

Thanks in advance,
dave w

[In-Tech]

A little off reach of the thread but hth's

[dave w]

A little off reach of the thread but hth's

Thank you

dave w

[s6tyn9]

I’m looking for 5.3, 2wd, 4L60E, truck MAF and stock LS1 intake calibration/bin.

[Eddieg9600]

I am needing a 2002 LS1 w/Auto trans bin. If anybody can help me out with this I will be forever in your debt!

[MrHappy013]

Whatever happened with the segment swapped 5.3 4L80e? Regardless, I just recently grabbed a PCM from a 2002 YukonXL with an LQ4 (verified pistons) with an AWD 4l60e/65e not sure which. It is also DBW. This is the stock tune pulled with PCM Hammer.

[JCCARTER]

is this still available? for some reason it won't download for me

2002 Chevrolet YukonXL LQ4 DBW 4L60e AWD (12212156).bin (512.0 KB, 45 views)

[ralmo94]

is this still available? for some reason it won't download for me

2002 Chevrolet YukonXL LQ4 DBW 4L60e AWD (12212156).bin (512.0 KB, 45 views)

I couldn't get it to either?
Wonder if some has could post it up for you, or if it's a glitch in the site?

[c4vette]

Whatever happened with the segment swapped 5.3 4L80e? Regardless, I just recently grabbed a PCM from a 2002 YukonXL with an LQ4 (verified pistons) with an AWD 4l60e/65e not sure which. It is also DBW. This is the stock tune pulled with PCM Hammer.

This is the file I am looking for. This link is not working for me. Any help is appreciated!