Quote Originally Posted by doc_rock View Post
OK, before I go and get this all sorted out with SAUJP - this is the .BIN file I pulled using the HDR1.

Does this look more like it should?
Yes, it's now reasonable, relatively reasonable. There are so many differences from a stock TPI that it's going to take a while to sort out. No reason for many of these changes, like spark latency; but that's what happens with a "custom tune". For example, you said in Post #1 that your base timing was 10 deg. The BIN is 6 deg. That's a problem right there. Don't change your distributor setting if in fact you are really at 10 deg at operating temp with bypass line disconnected. We'll just change the final calibration to 10 deg.

Let me look at it for a while and I'll be back with some recommendations.

Also, injector flow rate is set to 30#. What # injectors are you using?