....
....
Last edited by LRT; 05-24-2021 at 11:25 PM.
Hi everyone. Newbie. Justed wanted to know if anyone have a bin file for a ecm that I picked up at the junkyard for me to learn how to remove vats. I also have another ecm for the 5.3l engine and tranny I picked up at the junkyard. But first I want to use one of them to learn how to use. It's from a 03 Tahoe 2wd 5.3l with a 6L60e tranny. The number on the pcm is 12582607.
If any one has a bin please help me out. I appreciate it.
Joey
A 6L60E transmission in a 2003 Tahoe? Are you sure on that? Maybe a 4L60E transmission? That trans would have been typical for a 2003 Tahoe and as far as I can tell, GM never made a 6L60E. The 6L80E came out in 2006 and it could have been possibly retrofitted to a 2003 Tahoe with a 5.3 liter but you won't find a stock 2003 6L80E BIN mated to a 2003 engine. That combo did not exist in 2003.
If it is a 4L60E that you have, there are several combos with richly detailed XDF files around here for 5.3L engines and 4L60E transmissions. Basically, you would completely overwrite (after making a copy) your 12582607 BIN and replace it with one of these:
12208322
12212156
12202088
Rick
1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's
Hi there Rick. Nice to meet you. Thank you for hour info and hour right about that tranny. I just happen To make a mistake in tying that tranny. The right tranny was a 4L60E. I’m using this Ginny pig pcm so I could learn how to remove vats. I also have another pcm that came from a 03 Tahoe 5.3l 2wd with a 4L60E tranny. I bough this so I could put it in on a 1951 GMC 100 pickup. So I’m try to learn how to remove the vats so I could get it started.
Thank you have a good day.
Joey from Cali
About the 03 with the return. If i use a 04 os on my 03 engine would i just compare injector flow rate and copy whats on the 03 tune onto the 04 bin through tunerpro? If that makes sence
I'm looking for the same.
2003 Workhorse P42 Chassis L31 5.7L 4L80E Flashed into a 12200411 with TIS2000 and then read with PCM Hammer
OS 12212156
Stock Unmodified
2003 chevy express 2500 van 5.3-4L60E updated. (thanks to kur4o)
03 Hummer (2 cars)
I need a matching xdf file for my 03 5.3 dbc 12579405 is my bin i need xdf for that bin or a new bin and matching xdf to write to my 03 pcm to make it run with no vats .
any 2003 Deville bin files? anyone upgrade to an 0411 computer for caddys?
03 Silverado 1500 with 3.73 gears and 26 gallon fuel tank. 5.3L 4L60E. edit: cant find bin to reupload. tis pdf has calibration info if someone has access to tis web.
Last edited by rickky bobby; 09-27-2023 at 08:41 PM.
hey just so you know, in this bin file (12579405) you have downshift from 3>2 set above max speed meaning it could manually downshift from 3>2 at any speed. thatll trash a stock 4l60 considering max speed is 26mph higher than stock. correct me if im wrong but i think it should be noted.
Pulled this bin today off of a random loose pcm laying around. I believe it to be from a 2003 6.0/80e van
Bookmarks