PCM Hammer using VCX Nano

[bonanza]

!!!! SUCCESS !!!!

For anyone else who has this issue, I thought I would post how I resolved my problem.

After following the instructions in Post #2, VX Manager kept giving an error message that the license needed to be updated. To update the license it seems that the firmware had to be updated first.

In VX Manager - Device Tab

- Select Update Firmware.

When the update was finished, the program tried to update the license and failed.

I then selected - Update License.

The license was successfully updated.

So far I have been able to read a 1MB PCM, read time was 5 minutes.

I haven't tried writing yet.