Modify table parameters in $8D

[84Elky]

so I got it to work. I had to carry over the entire connect and Mode 1 dump instructions to get the S_AUJP adx to work but it does and I have a few values to look at. I do think something is changed in the spark control because I'm showing a consistent 30* advance during a cold idle.

*edit- so um... seems I have it set to 30* on the main spark table. Strange it was staying fairly close to the 24* on the idle table before.

space --- Something is clearly wrong with your S_AUJP bin. There is no change to spark logic. Again, there are hundreds of users without incident.

If you would please post that listed below, I'll be glad to help. But can only deal with pure S_AUJP files -- not hybrids or mix and match.

-S_AUJP bin that is allegedly not working properly
-The $8d bin used to create the S_AUJP bin
-S_AUJP ADX and XDF files being used

Elky