Hello all,
I need to start editing the constants (scalars) for:
1)The Pro Comp Cam # 07-305-8....not sure where this is
2) Long tube headers....not sure where this is/does this even need to be edited?
3)Bored 0.030 over..... i am looking at the "cylinder volume" and it is currently @ 717.25 ml/cyl. is this ok? or at what # does it need to be?
4)Bosch 3 injectors/24 lb./PN FIC24TPI.... on the "injector flow rate" it is currently @ 24.87lb/hr( i believe this is ok?)
5) Gears > 3:08.... not sure where this is
6) Tire size > 17 in ....not sure where this is
Wondering if someone can point me in the right direction to the correct constant(?) to make these adjustments.
PCM 16188051
thank you
Bookmarks