Those tables are probably not defined in the XDF you are using. Post the bin file from your 03 and the bin file from the 04 you are using and I can insert the data into the 04 file and save it and put it back up here for you to use. I have lots of editing tools. That way if there is a difference in fuel tank sizes between the 2 it will have the correct data for your 03 truck. Many times there can be slight differences in fuel tank sizes in the trucks and I can copy every table relevant to that into the 04 file. If you don't have a bin for the 03 then post the VIN and I can figure it out.