You should be fine with them in the collectors. Back to basics, do you have a leaky flange gasket? That will pull air into the exhaust and create a lean reading at the O2 sensor.
You should be fine with them in the collectors. Back to basics, do you have a leaky flange gasket? That will pull air into the exhaust and create a lean reading at the O2 sensor.
You'll have a much better experience with $EE XDFs if you set the drop-down menu in the top-left to "Parameter Category." Here are the tables in question (note that steveo's description is in parentheses):
tables.jpg
1990 Corvette (Manual)
1994 Corvette (Automatic)
1995 Corvette (Manual)
Ok I'll go back in and see if I can accomplish that. I see where your screen shots as well as the ones in the fbody tech article have the folders in the parameter category. Thats what I've been looking for in my TunerPro. Haven't found it yet. All Ive seen is the scalers, flags and tables icons. Folders are not showing in my tree
1990 Corvette (Manual)
1994 Corvette (Automatic)
1995 Corvette (Manual)
... should not cause a lean condition though
Good article. Thanks for posting the link.
Bookmarks