The throttle body that came with the intake manifold has a stud for the kickdown cable. I was just going to get a bracket for it and put it on haha
The throttle body that came with the intake manifold has a stud for the kickdown cable. I was just going to get a bracket for it and put it on haha
[QUOTE=85ChevyC20;88568]The throttle body that came with the intake manifold has a stud for the kickdown cable. I was just going to get a bracket for it and put it on haha[/QUOTE
If you have not already, you can use the pcm for TCC lock-up, there are provisions for this in several .bins. Or you can switch in for manual lock-up in it. My 700R4 has a kit that comes from Monster Transmissions. When the switch is on, the TC will only lock-up in 4th gear. With the switch off it does not lock at all.
Jack of all trades, absolutely master of none! Too many projects, not enough time and limited funds.
Geronimo, Guadalupe County, Texas
1993 K1500 Suburban - SBC Refit retraining the TBI and Computer Control.
2004 Z66 Avalanche 5;3 to 6.0 LQ9 upgrade - project pending
Bookmarks