7427 $0D Not Going Into Closed Loop

[Thainglo]

Your "Closed Loop Idle" is checked. When I use "compare" to other bins, it is not checked. Your House Run xdl, closed loop flashes for a fraction of a second and purdy much stays open loop the entire log. I'm a little concerned that the log appears glitchy with alot of data swings???

Thanks for spotting the Closed Loop Idle flag. I will check that out and experiment.

You are right on the noise in the signal. I've seen that before on previous tunes and logs. My thoughts were that it must be something in the cable or auto prom as I could feel nothing causing disruption in the operation of the car. Is that a logical assumption?