Anyone have or know where to get a MAF spreadsheet for the 4th gen. ? Thanks in advance
Anyone have or know where to get a MAF spreadsheet for the 4th gen. ? Thanks in advance
Still looking for a MAF spreadsheet for the 94 LT1
have you tried eehack's onboard maf analyzer? it does a way more detailed analysis than a spreadsheet based tool would
i doubt it, and it's pretty much always had a maf analyzer. if you log with eehack just load all logs that you have using your current bin, then analyze -> ve maf fueling -> run analysis and it's the table on the right.
Thanks... i know area you are talking about. Thanks Gary
When I first saw this thread, I was thinking the request was for data to interpolate the Corvette "BLADE MAF" tables for a different Operating System.
As the post developed, more clarification was provided that the request was a tuning question.
dave w
EE_16199181.bin
MAF Sensor Calibration Table 1
Hz gm/sec
1488 2.86
1616 3.30
1744 3.80
1872 4.36
2000 4.99
2128 5.70
2256 6.47
2384 7.30
2512 8.20
2640 9.16
2768 10.19
2896 11.30
3024 12.48
3152 13.73
3280 15.09
3408 16.54
3536 18.11
3664 19.80
3792 21.59
3920 23.52
MAF Sensor Calibration Table 2
Hz gm/sec
4048 25.55
4176 27.69
4304 29.94
4432 32.28
4560 34.69
4688 37.25
4816 39.91
4944 42.69
5072 45.58
5200 48.63
5328 51.83
5456 55.20
5584 58.77
5712 62.52
5840 66.47
5968 70.62
6096 74.96
6224 79.52
6352 84.27
6480 89.23
MAF Sensor Calibration Table 3
Hz gm/sec
6608 94.41
6736 99.80
6864 105.41
6992 111.23
7120 117.27
7248 123.52
7376 129.98
7504 136.66
7632 143.54
7760 150.60
7888 157.89
8016 165.39
8144 173.11
8272 181.01
8400 189.24
8528 197.90
8656 206.75
8784 215.86
8912 225.23
9040 234.88
MAF Sensor Calibration Table 4
Hz gm/sec
9168 244.77
9296 254.94
9424 265.36
9552 276.05
9680 286.99
9808 298.20
9936 309.66
10064 321.39
10192 333.38
10320 345.63
10448 358.13
10576 370.89
10704 383.91
10832 397.19
10960 410.73
11088 424.52
11216 511.73
-Carl
Picture attached is a TBI AFR Averages MAP vs. RPM
Perhaps eehack's onboard maf analyzer has a similar view for MAF vs. RPM?
dave w
Bookmarks