Burning a chip for an 88 TPI MAF engine with EGR delete plate. After selecting EGR Disable ..would it be advisable to also set the EGR On at 100% TPS position and EGR Off at 0% TPS position (or leave it alone)?
Burning a chip for an 88 TPI MAF engine with EGR delete plate. After selecting EGR Disable ..would it be advisable to also set the EGR On at 100% TPS position and EGR Off at 0% TPS position (or leave it alone)?
i believe in the past i just cranked the minimum enable temp to as high as it goes
You may have to disable the MALF code in "Flags"
No EGR FLAG listed....
In the parameter list the enable EGR feature is not labeled as "enable temp" but does have "enable EGR if % of TPS is met"...going to just change it to max TPS position.
Thanks!
Bookmarks