WTB 7730/7727 V8 memcal

[Tunedperformance]

Yes the lb9 is a 305 and the l98 is a 350, The i/o and netress are the same but the knock filters are different and yes I have speed density ones. I have a new axxb reprogramable one. You can still buy this but its a otp acdelco 16163062. I have a Axxf, Atnx, Axyc,Awfz, 2 of the Anjf, Axcp, and 5 new aujp's, tpis reprogramed l98 vette memcal, Hypertech memcal corvette .bin and knock p/n 121381.

http://www.amazon.com/s/ref=nb_sb_no...words=16163062

[bigbadz]

Yes the lb9 is a 305 and the l98 is a 350, The i/o and netress are the same but the knock filters are different and yes I have speed density ones. I have a new axxb reprogramable one. You can still buy this but its a otp acdelco 16163062. I have a Axxf, Atnx, Axyc,Awfz, 2 of the Anjf, Axcp, and 5 new aujp's, tpis reprogramed l98 vette memcal, Hypertech memcal corvette .bin and knock p/n 121381.

http://www.amazon.com/s/ref=nb_sb_no...words=16163062

What do you have and price with shipping to 98532. Thanks

[Tunedperformance]

are you looking for a 305 speed density or 350 ? and will any bcc work ?
I was selling some on ebay until this guy stated selling these and drove the price of the real ones down

http://www.gearhead-efi.com/Fuel-Inj...highlight=scam

[bigbadz]

305 speed density code AXXB or one for 305tpi w/auto

[Tunedperformance]

I have a axyc I can change into a axxb for $65 shipped, I might have a few more I will go through my drawer of memcals later today.

[Tunedperformance]

I have a axxf as well the axyc has been tested but I got it from a guy who unsoldered the chip and jacked up the memcal holder. I remover the i/o and netress and knock filter and soldered them into a another memcal and tested it on my test bench. The axxf is a uv erasable and has never been modified $100 shipped is the best I can do on that and if you need a 730 I can include one for another $25.
130203_0001.jpg

[bigbadz]

I have a axxf as well the axyc has been tested but I got it from a guy who unsoldered the chip and jacked up the memcal holder. I remover the i/o and netress and knock filter and soldered them into a another memcal and tested it on my test bench. The axxf is a uv erasable and has never been modified $100 shipped is the best I can do on that and if you need a 730 I can include one for another $25.
130203_0001.jpg

I found a new one yesterday and purchased it.Seems as though the salvage yards are lacking in V-8 memcals.I bought a ECM and it had a V-6 prom in it? The vin #'s were correct for a '91 Z28 V-8 TPI/auto.Maybe thats why it was there? Thanks for your time.